BEARCAT

CH450H 4.5 Inch Chipper

ECHO Bear Cat’s line of skid steer chippers attach in seconds and are driven solely by your skid steer’s hydraulics. They are available in standard models. Either model will make short work of any troublesome debris.

  • Continuous chipping size rating refers to the suggested feeding size of limbs for normal operation
  • Requires 11-15 gpm flow

Dimensions
Chipper Capacity (In.): up to 4.5
L x W x H (In.): 41 x 28 x 40
Chipper Disc: Cantilever 14×1/49 lbs., rotates at 2,700 rpm at 11 gpm – 3,700 at 15 gpm
Weight (lbs.): 286
Feed Opening: 4.5 x 5
Chipper/Shredder
Feed System: Gravity/Self Feed
Chipper Chute Opening (In.): 12 x 13
Chipper Blades: 2 reversible steel chipper blades with 4 sided adjustable anvil
Rotor Weight (lbs.): 49
Discharge: Ground
Engine
Skid GPM Required: 11 gpm – 15 gpm
Hydraulic Flow: Skid Steer Chippers

CH500H 5 Inch Chipper

The ECHO Bear Cat CH500H chipper is driven by the hydraulic system of the skid or track steer loader it’s mounted to. The CH500H requires 15-22 gpm flow to drive the hydraulic feed roller and chipping rotor. At 22 gpm flow, the 140 lb. rotor turns at 4,000 rpm.

The CH500H chipper features two, universal attachment plate positions so the user can feed the chipper from the side or front, depending on what the operator needs or the situation dictates. The 360 degree rotating discharge tube with deflector cap allows placement of chips where ever they need to go.

Dimensions
Chipper Capacity (In.): up to 5
Chipper Capacity (In.): 5
L x W x H (In.): 73 x 53 x 93
Weight (lbs.): 1145
Chipper Disc: 20×1.25/140 lbs., rotates at 2,700 rpm at 15 gpm; 4,000 rpm at 22 gpm
Feed Opening: 5.5 x 7
Chipper/Shredder
Feed System: Hydraulic
Auto Feed: Yes
Chipper Chute Opening (In.): 27 x 28
Chipper Blades: 4 reversible steel blades with 4 sided adjustable anvil
Rotor Weight (lbs.): 140
Discharge: Overhead
Engine
Skid GPM Required: 15-22 gpm

CH800H 8 Inch Chipper

The ECHO Bear Cat CH800H chipper is driven by the hydraulic system of the skid or track steer loader it’s mounted to. The CH800H requires 25-38 gpm flow to drive the hydraulic feed roller and chipping rotor. At 38 gpm flow, the 275 lb. rotor turns at 2,500 rpm.

The CH800H chipper features two, universal attachment plate positions so the user can feed the chipper from the side or front, depending on what the operator needs or the situation dictates. The 360 degree rotating discharge tube with deflector cap allows placement of chips where ever they need to go.

Dimensions
Chipper Capacity (In.): up to 8
Chipper Capacity (In.): 8
L x W x H (In.): 74 x 60 x 88
Weight (lbs.): 1525
Chipper Disc: 30 x 1.25/275 lbs., rotates at 1,600 rpm at 25 gpm; 2500 at 38 gpm
Feed Opening: 9 x 9
Chipper/Shredder
Feed System: Hydraulic
Auto Feed: Yes
Chipper Chute Opening (In.): 30 x 31
Chipper Blades: 4 reversible heat-treated chipper blades with 4-sided adjustable anvil
Rotor Weight (lbs.): 275
Discharge: Overhead
Engine
Skid GPM Required: 25-38 gpm
Hydraulic Flow: Skid Steer Chippers